Skip to content
Implements Direct Implements Direct

3 Point Hitch Fixed Tooth Mulcher PTO 1.5m

Baumalight

$21,995.00 NZD inc GST

$19,126.10 NZD exc GST

Baumalight MP360 3 Point Hitch PTO driven Mulcher

Overview

This Canadian-designed and built fixed tooth PTO driven Mulcher is the ideal partner for your Category 1 tractor
With low ground speed, the MP360 Brush mulcher will efficiently cut heavy vegetation and light brush using high-speed teeth. The concave-shaped carbide tip aggressively cuts through the brush, and mulches bit by bit. It is easy and efficient to the cutting teeth can be rotated 3 times so there is always a sharp edge.

Features & Benefits

Made in Canada

  • Integrated brush Bar. Helps bend taller brush for mulching
  • Integrated Skid Shoes, help the mulcher move smoothly for optimal mulching
  • High-speed teeth, concave-shaped providing a precise cutting action by chipping the brush, bit by bit
  • Round teeth. 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh cutting edge, increasing the longevity of the blades
  • Heavy Duty tooth holders
  • 6 free replacement teeth, conveniently located in the operator's manual tube
  • Spiral tooth pattern, allowing one tooth to engage at a time
  • Slip Clutch, for gearbox and drive system safety
  • Heavy Duty Gearbox, High powered mulching and durability
  • Reinforced Belt, absorbing the shock of heavy mulching
  • Powder Coated finish

Specifications

Specifications Units
Overall width 1828 mm
Cutting width 1524 mm
Linkage 3pt linkage Category 1
Tractor Size 30- 55 HP(Engine HP)
PTO input RPM 540 RPM
Cutting depth level
Rotor Diameter 15" 381mm
Number of Cutters 74
Rotor shaft size 2 " 50.8mm
Hitch Size Category 1
Gearbox Spline Size 1-3/8"
Quick hitch compatible No
Weight 544kg

Flail Mowers, Mulchers & Slashers — Common Questions

What PTO speed do I need for a flail mower or slasher?

Most flail mowers and slashers run at 540 RPM; some larger models are 1000 RPM. Check the product spec and match it to your tractor's PTO speed — running one at the wrong speed can damage the gearbox.

Do I need a hydraulic side-shift, or is manual offset enough?

Manual side-shift is fine if you only occasionally mow along fence lines or ditches and don't mind stopping to reposition it. Hydraulic side-shift lets you offset the mower from the seat while moving, which is worth the extra cost if you're mowing verges or banks regularly.

What's the difference between a flail mower and a slasher?

A flail mower uses multiple free-swinging blades (flails) on a rotating drum, giving a fine, mulched finish that's safer around debris and better for orchard, vineyard or roadside work. A slasher (rotary mower) uses fewer fixed blades spinning flat, cutting faster over rough pasture but leaving a coarser finish. If you're mowing long grass or scrub at pace, a slasher is usually the better fit; for a tidy, mulched finish around trees or fences, go flail.

How much tractor horsepower do I need?

Keep 10 to 15% PTO power in reserve above the mower's minimum rating, especially in heavy or wet conditions — running right at the limit shortens gearbox and belt life. See our Tractor Size Guide for how to check your tractor's PTO horsepower.

Search