Skip to content
Implements Direct Implements Direct

Menasor T Mulcher 2.4m Hydraulic Side Shift

Mateng

$9,895.00 NZD inc GST

$8,604.37 NZD exc GST

Overview

Heavy-duty 2.4m offset mulcher from Mateng for tractors 80-150 HP. Handles heavy grass, brush, pruning, saplings up to 70mm diameter, small stumps, and crop debris. Features hydraulic side shift (up to 1580mm right offset), hydraulic rear door for high-volume discharge, and forged hammer flails.

Features & Benefits

  • Hydraulic side shift - 1330mm left / 1070mm right (left position), 820mm left / 1580mm right (right position)
  • Hydraulic opening rear door for discharging high-volume materials
  • Forged hammer flails (20 pieces) for cutting material up to 70mm diameter
  • Adjustable roller with skids and rear scraper
  • Externally adjustable belt tensioner
  • Parking stand for easy tractor connection
  • Front chain debris curtain
  • Floating top link pin
  • High-strength flail bolts
  • Enclosed belt housing
  • PTO with shear bolt protection

Specifications

Specification Value
Cutting Width 2400mm
Overall Width 2630mm
Overall Depth 1500mm
Overall Height 1060mm
Weight 950kg
Offset Left Position 1330mm left / 1070mm right of centre
Offset Right Position 820mm left / 1580mm right of centre
Rotor Speed 2250 RPM
Rotor Diameter 194mm
Flail Tip Diameter 447mm
Hammer Flails 20 pieces (forged)
PTO Input Speed 540 RPM
Linkage Category 2 (28mm lower pins, 25mm upper pin)
Number of Belts 5
Tractor HP Range 80-150 HP

Best For

  • Heavy grass and brush cutting on larger properties
  • Orchard and vineyard pruning mulching
  • Clearing saplings and small stumps up to 70mm
  • Stubble and crop debris management
  • Roadside and boundary maintenance with offset capability
  • High-volume vegetation management

Compatibility

  • Tractor HP: 80-150 HP
  • Hitch Type: Category 2 3-point linkage (28mm lower pins, 25mm upper pin)
  • PTO: 540 RPM with shear bolt protection

What's Included

  • Mateng Menasor T 2.4m Mulcher
  • 20 forged hammer flails
  • PTO shaft with shear bolt
  • Hydraulic hoses for side shift and rear door
  • Parking stand
  • Front chain debris curtain
  • Adjustable roller with skids

Warranty & Support

  • 24 month Manufacturer warranty applies
  • Spare parts available through Implements Direct
  • Technical support provided

Shipping & Freight

This item requires freight delivery. Contact us for a freight quote to your location. Crate dimensions and weight available on request.

Flail Mowers, Mulchers & Slashers — Common Questions

What PTO speed do I need for a flail mower or slasher?

Most flail mowers and slashers run at 540 RPM; some larger models are 1000 RPM. Check the product spec and match it to your tractor's PTO speed — running one at the wrong speed can damage the gearbox.

Do I need a hydraulic side-shift, or is manual offset enough?

Manual side-shift is fine if you only occasionally mow along fence lines or ditches and don't mind stopping to reposition it. Hydraulic side-shift lets you offset the mower from the seat while moving, which is worth the extra cost if you're mowing verges or banks regularly.

What's the difference between a flail mower and a slasher?

A flail mower uses multiple free-swinging blades (flails) on a rotating drum, giving a fine, mulched finish that's safer around debris and better for orchard, vineyard or roadside work. A slasher (rotary mower) uses fewer fixed blades spinning flat, cutting faster over rough pasture but leaving a coarser finish. If you're mowing long grass or scrub at pace, a slasher is usually the better fit; for a tidy, mulched finish around trees or fences, go flail.

How much tractor horsepower do I need?

Keep 10 to 15% PTO power in reserve above the mower's minimum rating, especially in heavy or wet conditions — running right at the limit shortens gearbox and belt life. See our Tractor Size Guide for how to check your tractor's PTO horsepower.

Search