Skip to content
Implements Direct Implements Direct

Del Morino Ginger Flail Mower 1.25m – 15–28HP

Del Morino

$3,995.00 NZD inc GST

$3,473.93 NZD exc GST

Overview

Lightweight 1.25m flail mower from Del Morino Italy for sub-compact tractors 15-28 HP. Designed for maintaining grassed areas and mulching sticks and small shrubs up to 25mm diameter. Features hammer flails, adjustable cutting height, and quick-hitch compatibility. Manufactured in Caprese, Italy.

Features & Benefits

  • 20 hammer flail blades for effective mulching
  • Adjustable rear roller sets cutting height (30-60mm)
  • Open discharge design above roller for efficient material flow
  • 2-belt drive system
  • Quick-hitch compatible (works with John Deere iMatch and Sierra quick hitches)
  • Series 2 PTO shaft included
  • Category 1 3-point linkage
  • Lightweight design (150kg) suited to sub-compact tractors

Specifications

Specification Value
Cutting Width 1250mm (1.25m)
Overall Width 1350mm
Cutting Height Range 30-60mm (adjustable)
Weight 150kg
Flail Blades 20 pieces (hammer type)
Drive System 2-belt drive
PTO Series 2 shaft, 540 RPM
Linkage Category 1 3-point (quick-hitch compatible)
Tractor HP Range 15-28 HP
Country of Manufacture Italy

Best For

  • Maintaining grassed areas on lifestyle blocks
  • Mulching grass and light vegetation
  • Clearing sticks and small shrubs up to 25mm diameter
  • Sub-compact tractor applications
  • Properties requiring lightweight, maneuverable mowing equipment

Compatibility

  • Tractor HP: 15-28 HP
  • Hitch Type: Category 1 3-point linkage, quick-hitch compatible
  • PTO: 540 RPM, Series 2 shaft
  • Compatible Models: Kubota BX2380, BX2680; John Deere 1025R, 2025R; Kioti CS2610; Massey Ferguson GC1723; New Holland Boomer 25; and other sub-compact tractors in the HP range

What's Included

  • Del Morino Ginger 1.25m Flail Mower
  • 20 hammer flail blades
  • Series 2 PTO shaft (540 RPM)
  • Adjustable rear roller
  • Category 1 3-point linkage mounting

Warranty & Support

  • 2 year factory warranty
  • Spare parts available through Implements Direct
  • Technical support provided

Shipping & Freight

Ships fully lubricated. Minor assembly required for 3-point linkage. Freight cost calculated at checkout.

Flail Mowers, Mulchers & Slashers β€” Common Questions

What PTO speed do I need for a flail mower or slasher?

Most flail mowers and slashers run at 540 RPM; some larger models are 1000 RPM. Check the product spec and match it to your tractor's PTO speed β€” running one at the wrong speed can damage the gearbox.

Do I need a hydraulic side-shift, or is manual offset enough?

Manual side-shift is fine if you only occasionally mow along fence lines or ditches and don't mind stopping to reposition it. Hydraulic side-shift lets you offset the mower from the seat while moving, which is worth the extra cost if you're mowing verges or banks regularly.

What's the difference between a flail mower and a slasher?

A flail mower uses multiple free-swinging blades (flails) on a rotating drum, giving a fine, mulched finish that's safer around debris and better for orchard, vineyard or roadside work. A slasher (rotary mower) uses fewer fixed blades spinning flat, cutting faster over rough pasture but leaving a coarser finish. If you're mowing long grass or scrub at pace, a slasher is usually the better fit; for a tidy, mulched finish around trees or fences, go flail.

How much tractor horsepower do I need?

Keep 10 to 15% PTO power in reserve above the mower's minimum rating, especially in heavy or wet conditions β€” running right at the limit shortens gearbox and belt life. See our Tractor Size Guide for how to check your tractor's PTO horsepower.

Search